Installation
Instructions for Wheel Center Caps Decals
Ensure a flawless application of your Decals for by following
these simple steps.
These decals are crafted from clear resin and high-quality vinyl
to provide a durable and stylish upgrade for your vehicle.
What You'll Need:
Installation Steps:
1. Prepare the Surface:
-
Clean the wheel center caps
thoroughly using mild soap and water to remove any dirt, grease, or
residue.
-
The surface should be absolutely
clean and FLAT
-
Dry the center caps completely
with a clean, lint-free cloth.
-
For optimal adhesion, consider
wiping the surface with isopropyl alcohol to remove any remaining
oils. Allow it to dry fully.
-
The temperature of the environment should be
above 12°C or 53°F
2. Position the Decal:
We
recommend to use the hair dryer for the best gluing of stickers. It
is enough to blow warm air on a sticker within 30 seconds and then
paste them.
Attention!
Use
the hair dryer only on the first (weakest)
speed.
-
Carefully peel the backing off
the decal, taking care not to touch the adhesive side with your
fingers to avoid fingerprints and oil transfer.
-
Align the decal with the center cap, ensuring it is properly
centered. Take your time to position it correctly before applying
pressure.
3. Apply the Decal:
Tips for Best Results:
-
Perform the installation in a
dust-free environment with moderate temperatures to ensure the best
adhesion.
-
Take your time during the
alignment step to avoid any misplacement.
-
If you need to reposition the decal, gently peel it off and
reapply, but be cautious as repeated repositioning can reduce the
adhesive effectiveness.
Enjoy your newly upgraded wheels with the stylish and durable
Wheel Center Caps Decals!